TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-36. OUTRIGGER LEG CYLINDER REPAIR (CONT).
(5)
(6)
(7)
Install wear ring (10) and seal (11) in
head (12).
Install preformed packing (13) and
backup ring (14).
Install head (12) on rod (3).
(8) Install rod assembly (3) in
cylinder (15).
NOTE
Apply lubricant to preformed packings before
installing.
(9) Install preformed packing (16), two backup
rings (17), preformed packing (18), backup
ring (19), and preformed packing (20).
(10) Install holding valve (21) in cylinder (15).
(11) Install wiper ring (22) in plate (23).
(12) Install backup ring (24), plate (23), and two
screws (25).
d. Follow-on Maintenance. None.
END OF TASK
1 7 - 1 60 Change 2
