TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-34. OUTRIGGER REMOVAL/INSTALLATION (CONT).
WARNING
Keep out from under heavy parts.
Falling parts may cause serious injury or
death.
NOTE
Right and left side outrigger mounting
hardware is removed the same way.
Right side is shown.
(2) Soldier A removes four screws (2),
washers (3), and spacers (4) while
Soldier B removes four nuts (5),
washers (6), and spacers (7) from mounting bracket (8).
(3) Repeat step (2) for other side.
(4) Remove outrigger assembly (1).
b. Installation.
(1) Position outrigger assembly (1).
NOTE
Right and left side outrigger mounting
hardware is installed the same way.
Right side is shown.
(2) Soldier A installs outrigger
assembly (1) on mounting bracket (2)
with four spacers (3), washers (4), and
screws (5) while Soldier B installs four
spacers (6), washers (7), and nuts (8).
(3) Repeat step (2) for other side.
c. Follow-on Maintenance.
(1) Install cable guide
(TM 9-2320-279-20).
(2) Install rear fenders (TM 9-2320-279-20).
(3) Connect outrigger hydraulic hoses and tubes (para 17-2).
END OF TASK
17-154
