TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-10. DIFFERENTIAL CARRIER, AXLE NO. 3 (AXLE MODELS 480, 580, AND 650) REPAIR
(CONT).
(61) Install six screws (40) and lockwashers (41).
Tighten screws to 155 to 175 lb-ft (210 to
237 N·m).
(62) Install pinion gear (38) on pinion (37).
Support bearing and bearing race are provided
as a set. Replace support bearing race
(para 10-8) whenever support bearing is
replaced.
(63) Install support bearing (42) and locknut (43).
Tighten locknut to 980 lb-ft (1329 N·m).
(64)
(65)
(66)
Install two bushings (44) in
carrier (2).
Lubricate bearing cones (6
and 8) with oil and position
bearing cups (45 and 46) on
bearing cones.
Attach suitable lifting device
to assembled ring gear and
differential (47).
Ring gear must be tilted to clear
casting inside carrier.
(67)
(68)
Soldier A installs assembled
ring gear and differential (47)
into carrier (2) while Soldier B
operates lifting device.
Remove lifting device from
assembled ring gear and
differential (47).
TA476362
TA476363
10-52
