TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-10. DIFFERENTIAL CARRIER, AXLE NO. 3 (AXLE MODELS 480,580, AND 650) REPAIR
(CONT).
(34)
(35)
(36)
(37)
(38)
(39.)
(40)
Remove outer bearing cone (35), spacer (34), spacer
washer (33), and inner bearing cone (32) from bearing
cage (30).
Get spacer (34) 0.001-in. (0.03 mm) thicker than last
spacer used and set aside for later installation.
(41) Lubricate and install pilot bearing (36) on pinion (37).
(42) Stake pilot bearing (36) and pinion (37) as shown in
pattern.
10-48