TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-10.1. HEAVY-DUTY WINCH CABLE SHEAVE REMOVAL/REPAIR/INSTALLATION (CONT).
(6)
(7)
(8)
Position rings (6), boots (7)
and install clamps (5).
Tighten four clamp
screws (11).
Install lockplate (12) with two
screws (2) and nuts (13).
f. Follow-on Maintenance.
(1) Heavy duty winch cable installed (TM 9-2320-279-20).
(2) No. 3 prop shaft installed (TM 9-2320-279-20).
(3) Left middle mud flap installed (TM 9-2320-279-20).
(4) Check for proper movement of cable guide.
END OF TASK
16-10.2. HEAVY DUTY WINCH AND BRACKETS REMOVAL/lNSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
Equipment Condition
M984E1
TM or Para
Condition Description
Test Equipment
TM 9-2320-279-10 Spade extensions removed.
None
TM 9-2320-279-20 Heavy duty winch cable
Special Tools
removed.
None
Special Environmental Conditions
Supplies
None
None
General Safety Instructions
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Level of Maintenance
Direct Support
None
16-24.6
