(1.1)
(2)
(3)
(4)
(5)
TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
Install two rubber pads (1) on two front frame mounting brackets (2).
Install two rubber pads (3) on two rear frame mounting brackets (4).
Soldier A holds eight screws (5) on two rear frame mounting brackets (4) while Soldier B loosens
nuts (6).
WARNING
Do not get under tank while supported by lifting device. Tank could fall causing
personal injury or death.
CAUTION
Tank must be lowered slowly and carefully into place while Soldier B and Soldier C
make sure tank does not collide with module or other vehicle components causing
damage to tank, module, or other vehicle components.
Attach suitable lifting device to tank (7).
Soldier A operates lifting device while Soldier B and Soldier C guide tank (7) so front tank
mounting brackets (8) and rubber pads (1) aline with front frame mounting brackets (2), and rear
tank mounting brackets (9) and rubber pads (3) aline with rear frame mounting brackets (4).
NOTE
Both left and right mounts are installed the
same way.
(6)
Install six springs (10), washers (11),
three screws (12), and locknuts (13) in
front tank mounting bracket (8) and
frame mounting bracket (2).
Change 2
15-69
