TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
15-2. CAB REMOVAL/INSTALLATION (CONT).
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Soldier A installs and
nuts (12) on screws.
holds two screws (10) while Soldier B installs two washers (11) and
Install shift cable (13) and four
wires (14 and 15) through
boot (16).
Install shift cable (13) and
bracket (17) with two
screws (18) and nuts (19).
Adjust shift cable (13)
(TM 9-2320-279-20).
Install washer (20) and cotter
pin (21).
Slide boot (16) up into position
with one cut wire (15) out of
bottom of boot.
Connect three wires (14).
Connect two cut wires (15)
with electrical butt connector.
15-10
