TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
15-2. CAB REMOVAL/INSTALLATION (CONT).
(16) Remove nut (30), lockwasher (31), wire (32), washer (33), and screw (34).
(17)
(18)
(19)
(20)
(21)
(22)
Remove two cotter pins (35) and pins (36).
Disconnect three wires (37).
Cut two wires (38).
Loosen two nuts (39) and remove two cables (40).
Remove four screws (41) and washers (42).
Slide boot (43) down.
15-6
