TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
Section III. DIFFERENTIAL CARRIERS
10-7. DIFFERENTIAL CARRIER COVER, AXLE NO. 3 REMOVAL/REPAIR/INSTllATlON.
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-on Maintenance
INITIAL SETUP
Models
All
References
None
Test Equipment
Indicator, dial
Special Tools
Socket, 2-7/8 in., 2BF707
Supplies
Solvent, dry cleaning, Item 57, Appendix C
Adhesive-sealant, silicone, Item 6, Appendix C
Compound, sealing and thread locking,
Item 25, Appendix C
Oil, lubricating, gear, Item 44, Appendix C
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W Wheel vehicle repairer (2)
Equipment Condition
TM or Para
Condition Description
LO 9-2320-279-12 Axle lubrication drained.
TM 9-2320-279-20 Propeller shaft removed.
TM 9-2320-279-10 Air system drained.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
NOTE
If axle removed from vehicle, go to step (5).
Tag and mark air lines before disconnecting.
(1) Remove power divider lockout air line (1).
(2) Remove fitting (2) from lockout air chamber (3).
Change 1
1 0 - 1 5
