TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13-30.1. RETRIEVER TOWING SUPPORT ASSEMBLY REMOVAL/lNSTALLATlON (M984E1)
(CONT).
Lift cylinder bracket is very heavy. Keep out from under heavy parts. Make sure
lifting device is around center of balance of part being moved. Falling parts may
cause serious injury or death.
(14) Attach suitable lifting device to lift cylinder bracket (28).
(15) Soldier A installs four screws (29) while Soldier B installs lift cylinder bracket (28) and four
nuts (30). Do not tighten.
(16) Soldier A installs six screws (31) while Soldier B installs nuts (32). Tighten nuts (30 and 32).
(17) Install brace (33) with two screws (34) and nuts (35). Do not tighten,
(18) Install two screws (36) and nuts (37).
(19) Tighten nuts (35 and 37).
c. Follow-on Maintenance.
(1) Install rear valve body brace (TM 9-2320-279-20).
(2) Install beacon support brackets (TM 9-2320-279-20).
(3) Install rear fenders (TM 9-2320-279-20).
(4) Install snatch block bar and pin (TM 9-2320-279-20).
(5) Install fairlead/tensioner lift bar support (TM 9-2320-279-20).
(6) Install rear clearance marker lights and bracket (TM 9-2320-279-20).
(7) Install lift cylinder (para 13-30.2).
(8) Install retriever tow cylinders (para 13-30.4).
(9) Install fixed work lamps (TM 9-2320-279-20)
(10) Start engine, engage PTO (TM 9-2320-279-10). Check for hydraulic leaks. Check retriever lift and
tow cylinder operation.
END OF TASK
13-90.6
