TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
(2)
Install suitable lifting device on rear
crossmember (2).
(3)
Soldier A operates lifting device while
Soldier B guides rear crossmember (2) on
frame (6).
(4)
Remove lifting device from rear
crossmember (2).
NOTE
Not all models have star-shaped lockwashers.
Star-shaped lockwashers are only on screw
closest to pintle.
(5)
Install trailer brake connection
bracket (7) to crossmember (2) with two
screws (8), lockwashers (8.1),
lockwashers (9), and nuts (10).
NOTE
Position wiring harness over top of cross
braces.
(6)
Install two cross braces (11) with four
screws (12) and nuts (13).
(7)
Install two clamps (14) to cross braces (11)
with two screws (15), washers (16),
lockwashers (17), and nuts (18).
(8)
Install two screws (19) through frame (6) and
crossmember (2).
(9)
Install two nuts (20). Do not tighten.
(10)
Install two screws (21) and nuts (22). Do
not tighten.
Change 2
13-67
