TM 9-2320-279-34-2
Frame Maintenance instructions (Cont)
13-23. REAR CROSSMEMBER REMOVAL/lNSTALLATlON (M978).
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SET UP
Models
M978
Test Equipment
None
Special Tools
None
Supplies
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-20 Rear composite light
assemblies removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
W A R N I N G
Fuel is very flammable and can explode easily. To avoid serious injury or death,
keep fuel away from open fire and keep fire extinguisher within easy reach when
working with fuel. Do not work on fuel system when engine is hot. Fuel can be
ignited by hot engine. When working with fuel, post signs that read NO
SMOKING WITHIN 50 FEET of vehicle.
NOTE
M978 vehicles without self-recovery winch do not have rear cable guide. Do
step (1) for vehicles without self-recovery winch. Do step (2) for vehicles with
self-recovery winch.
(1) Remove four nuts (1) and screws (2).
(2) Remove four nuts (1), screws (2), and rear cable guide (3).
13-64
