TM 9-2320-279-34-2
(10)
(11)
(12)
(13)
Steering System Maintenance Instructions (Cont)
InstaII preformed packing (10) on cylinder
head (11).
AIine matchmarks on cylinder head (11) and
housing (2) and install cylinder head.
Install 10 screws (12) with lockwashers (13). Tighten
screws to 55 lb-ft (75 N•m).
Coat preformed packing (14) with grease and install
in housing (2).
Be sure timing mark on piston
rack is alined with center of
output shaft gear on output
shaft.
(14) AIine arrow on output
shaft (5) with matchmark
on piston (7).
(15) Install output shaft (6).
(16) Install preformed
packing (15) on housing
cover (4).
(17) Install housing cover (4).
(18) Install eight screws (16)
with lo&washers (17).
Tighten screws to 55 lb-ft
(75 N•m).
12-39
