TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
12-6. SLAVE STEERING GEAR AND PITMAN ARM REMOVAL/REPAIR/INSTALLATION (CONT).
(5)
(6)
Aline arrow on output shaft (5) between
two matchmarks on output shaft
gear (6).
Install output shaft (5) on output
shaft gear (6).
(7) Install retaining pin (7).
(8) Install roll pin (8).
NOTE
When installing piston, be sure that end
with five holes is on the correct side of
housing.
(9) Install piston (9) in housing (2).
12-38
