TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
(6)
(7)
(8)
(9)
(10)
Soldier A and Soldier B support steering gear (2) and bracket (9) while Soldier C guides intergear
link end (10) in top of pitman arm (6).
Install steering gear (2) and bracket (9) with four nuts (11) and screws (12). Tighten to 50 lb-ft
(68 N•m).
Install screw (13) and nut (14).
Install screw (15), washer (16), and nut (17).
Install front drag link end (18) in pitman arm (6). Secure with screw (19), lockwasher (20), and
nut (21). Tighten to 90 lb-ft (122 N•m).
(11) Connect four hydraulic hoses (22).
(12) Install end yoke (23) onto steering gear (2) with screw (24) and locknut (25).
(13) Install screw (26), lockwasher (27), and nut (28) in intergear link end (10). Tighten nut to 90 lb-ft
(122 N-m).
g. Follow-on Maintenance.
(1) Fill hydraulic reservoir (LO 9-2320-279-12).
(2) Start engine and turn steering wheel stop-to-stop three times to bleed air out of system
(TM 9-2320-279-10).
(3) Adjust steering gear (para 12-7).
END OF TASK
12-31
