TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
Turn housing (2) around.
Install preformed
packing (25).
NOTE
When installing actuating
shaft, turn shaft by hand until
cap comes into place on end
of cylinder.
(26)
(27)
(28)
(29)
Thread actuating shaft
assembly (14) into piston
inside housing (2).
Aline matchmarks on
cylinder head (10) and
housing (2).
Install cylinder head (10) on
housing (2) with
10 lockwashers (26) and
screws (27). Tighten screws
to 20 lb-ft (27 N•m).
Install preformed
packing (28) on valve (29).
Install valve and turn valve
six turns.
(30). Aline arrow on output shaft (6) with scribe mark on piston (17).
12-29
