TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
12-3. INTERGEAR LINK REMOVAL/iNSTALLATION (CONT).
(4)
(5)
Remove nut (12), lockwasher (13), screw (14), and intergear link end connector (15) from slave
steering gear pitman arm (16).
Soldier A and Soldier B
remove intergear link (17)
by sliding intergear link
back, then forward through
splash guard opening (18).
b. Installation.
(1) Loosen nut (1).
(2) Adjust center-to-center
distance of intergear link end
connectors (2 and 3) on
intergear link (4) to 68.20 in.
(1 732.3 mm). Tighten two
nuts (1) to 90 lb-ft (122 N•m).
12-8
