TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
12-2. STEERING COLUMN REMOVAL/INSTALLATION (CONT).
(6)
(7)
(8)
Install grommet (17) on steering
column (10).
Install top collar (18) and bottom
collar (19) with two screws (20),
lockwashers (21), and nuts (22).
Install headlight guard (23) with four
screws (24).
c. Follow-on Maintenance.
(1) Install horn switch contact roller (TM 9-2320-279-20).
(2) Install turn signal and flasher (TM 9-2320-279-20).
END OF TASK
12-3. INTERGEAR LINK REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
Equipment Condition
TM or Pam
Condition Description
TM 9-2320-279-10 Shut off engine.
TM 9-2320-279-10 Engine cover opened.
TM 9-2320-279-10 Engine side panel removed.
TM 9-2320-279-20 Batteries disconnected.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
References
None
12-6
