TM 9-2320-279-34-2
Brake System Maintenance Instructions (Cont)
- --
(19)
(20)
(21)
(22)
Remove cam guide (35) from cam housing (4).
Remove capnut (36), washer (37), and maximum
pressure stop (38).
Remove capnut (39), washer (40), insert (41), and
screw (42).
Remove actuating cam (43) and inner friction disk (44) from cam
housing (4).
b. Cleanhg/inspection.
Adhesives, solvents, and sealing compounds can burn easily, can
give off harmful vapors, and are harmful to skin and clothing. To
avoid injury or death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with soap and water.
(1) Clean all metal parts in dry cleaning solvent.
(2) Inspect all metal parts for wear or damage.
(3) Replace damaged parts.
c. Assembly.
(1) Install friction disk (1) on actuating cam (2) and install actuating
cam in cam housing (3).
(2) Install insert (4), screw (5), washer (6), and
capnut (7). Tighten capnut finger-tight.
(3) Install maximum pressure stop (8), washer (9), and
capnut (10). Tighten capnut finger-tight.
(4) Push cam guide (11) in cam housing (3).
11-39
