TM 9-2320-279-34-2
Brake System Maintenance Instructions Cont)
c. Assembly.
(1)
(2)
(3)
(4)
(5)
(6)
Coat preformed packing (1) with lubricating oil and install on plunger (2).
Install spring (3) and plunger (2) in upper valve body (4).
Depress plunger (2) and install valve (5), washer (6), and locknut (7).
Hold plunger (2) in vise. Tighten nut (7) to 30 to 40 lb-in. (3 to 5 N•m).
Install control valve (8) and spring (9).
Coat preformed packing (10) with lubricating oil and
install preformed packing, packing retainer (11), and
retaining ring (12) in lower valve body (13).
(7) Coat preformed packing (14) with lubricating oil and
install in lower valve body (13).
(8) Coat preformed packings (15 and 16) with lubricating
oil and install on piston (17).
(9) Install plug (18).
11-35
