TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
9-14. AXLES NO. 1 AND NO. 2 BALL, BUSHING, AND OIL SEAL REMOVAL/INSTALLATION
(CONT).
(2)
(3)
Support axle ball (2) on blocks to protect seal end of assembly.
Install axle ball bushing (3) in axle ball (2) so grease slots (4) are
alined with trunnion holes (5) and open ends of grease slots
face up.
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(4)
(5)
Coat mounting face of axle housing
assembly (6) with silicone adhesive-sealant.
Install ball and bushing assembly (7) and
airhose mounting bracket (8) on axle housing
assembly (6) with six screws (9),
lockwashers (10), four screws (11), and
lockwashers (12).
c. Follow-on Maintenance. Install ball socket
(para 9-13).
END OF TASK
9-96
