TM 9-2320-279-34-1
Transfer Case Maintenance Instructions (Cont)
8.10. UPPER SHIFT ROD ASSEMBLY REPAIR (CONT).
c.
Assembly.
(1)
Slide shift rod (1) in fork (2).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(2)
Coat threads of two screws (3) with sealing compound,
(3)
Install two screws (3). Tighten screws to 40 lb-ft (54 N•m).
(4)
Secure two screws (3) together with lockwire (4).
(5)
Install two spacers (5 and 6) on shift rod (1).
d. Follow-on Maintenance. None.
END OF TASK
8-11.
LOWER SHIFT ROD ASSEMBLY REPAIR.
‘
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Solvent, drycleaning, Item 57, Appendix C
Oil, lubricating, Item 46, Appendix C
Lockwire, Item 39, Appendix C
Compound, sealing, Item 26, Appendix C
Grease, lithium, Item 36, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
Upper shift rod assembly
on clean work surface,
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
8-42 Change 3
