TM 9-2320-279-34-1
Transfer Case Maintenance Instructions (Cont)
8-10.
UPPER SHIFT ROD ASSEMBLY REPAIR.
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Solvent, drycleaning, Item 57, Appendix C
Oil, lubricating, Item 46, Appendix C
Lockwire, Item 39, Appendix C
Compound, sealing, Item 26, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
Upper shift rod assembly
on clean work surface.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(1)
Clean all metal parts in drycleaning solvent.
(2)
Inspect all parts for wear or damage.
(3)
Replace all worn or damaged parts.
a.
Disassembly.
NOTE
Spacers are different in length. Mark for
proper assembly.
(1)
Remove two spacers (1 and 2) from
shift rod (3).
(2)
Cut lockwire (4) holding two screws (5).
(3)
Remove two screws (5) from fork (6).
(4)
Remove shift rod (3) from fork (6).
b. Cleaning/inspection.
C h a n g e 3 8 - 41
