TM 9-2320-279-34-1
Transfer Case Maintenance Instructions (Cont)
8 - 7 . C E N T E R S H A F T R E P A IR
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
References
None
Test Equipment
None
Special Tools
None
Supplies
Compound, sealing, Item 26,
Appendix C
Solvent, drycleaning, Item 57, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
Center shaft on clean
work surface.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
a.
Disassembly.
(1)
Remove two screws (1) and retainer
washer (2) from end of center shaft (3).
(2)
Place center shaft assembly in suitable press
with large gear (4) up.
(3)
Press center shaft (3) out of bearing cone (5),
spacer (6), and large gear (4).
(4)
Remove spacer (7) from center shaft (3).
8-34 Change 3
