TM 9-2320-279-34-1
Electrical System Maintenance Instructions (Cont)
6-15.1. CHASSIS WIRING HARNESS REMOVAL/INSTALLATION (M984E1) (CONT).
(10)
(10.1)
(11)
Remove nut (22), two lockwashers (23), and three wires (24).
Remove nut (24.1), lockwasher (24.21, wires (24.3 and 24.4), and screw (24.5) from right side axle
stop (24.6).
Disconnect connector (25) from clearance light harness connector (26) and equipment body (27).
(12)
Remove tape from speedometer wire connector (28) and disconnect connector (29).
6-122.2
Change 3
