TM 9-2320-279-34-1
Electrical System Maintenance (Cont)
N O T E
Do steps (2) through (6) for
right and left rear clearance
light and taillight wires. Right
rear shown.
(2) Remove three screws (8),
nuts (9) lockwashers (10),
and cover (11).
(3) Disconnect clearance light
wire (12). Remove wire
from cover (11).
(4) Disconnect four taillight
wires (13).
(5) Remove clearance light
wire (12) taillight
wires (12) and
grommet (14) from
fender (15).
(6) Remove grommets (14) from wires (12 and 13).
(7) Disconnect connector (16) from high idle control box (17).
(8) Remove screws (18) and clamps (19) from rear fenders (15 and 20) and chassis wiring
harness (2 1).
(9) Pull chassis wiring harness (21) under vehicle.
6-122.1
