TM 9-2320-279-20-3
M978 Tanker Maintenance Instructions (Cont)
25-33. ED EDUCTOR ASSEMBLY REMOVAL/REPAIR/INSTALLATlON.
This task covers:
a. Removal
b. Disassembly
d. Assembly
e. Installation
c. Cleaning Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
M978
Test Equipment
None
Special Tools
N o n e
Supplies
Compound. sealing, pipe thread. Item 18,
Appendix C
Adhesive-sealant, silicone, Item 4, Appendix C
Solvent. dry cleaning, Item 47. Appendix C
Personnel
Required
MOS. 63S, Heavy wheel vehicle mechanic (2)
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10
Pump module top and rear
access doors opened.
Special Environmental Conditions
None
General Safety Instructions
No smoking, flame, sparks. and hot or glowing
objects within 50 ft (15 m) of vehicle.
a. Removal.
WARNING
Contact with fuel can irritate
eyes and skin. Do not let fuel get
into eyes. If fuel comes into
contact with eyes, immediately
rinse eyes with clear water. Wash
fuel off skin with soap and water
as soon as possible after contact.
(1) Remove two nuts (l),
screws (2), and coupling
halves (3).
(2) Push coupling gasket (4) on
ED EDUCTOR assembly (5).
(3) Remove two nuts (6),
screws (7), and coupling
halves (8).
(4) Push coupling gasket (9) on
ED EDUCTOR assembly (5).
25-146
