TM 9-2320-279-20-3
M978 Tanker Maintenance Instructions (Cont)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
2 5 - 92
a. Removal.
NOTE
This task is performed from
inside module.
(1) Remove two locknuts (1)
and U-bolt (2) from
bracket (3).
WARNING
Contact with fuel can irritate
eyes and skin. Do not let fuel
get into eyes. If fuel comes
into contact with eyes,
immediately rinse eyes with
clear water. Wash fuel off skin
with soap and water as soon
as possible after contact.
25-19. V5 AIR ACTUATED FLOW VALVE AND FLANGE COUPLINGS
REMOVAL/INSTALLATION (CONT).
Remove two nuts (4),
screws (5), and coupling
halves (6) from coupling
gasket (7).
Remove two nuts (8),
screws (9), and coupling
halves (10) from coupling gasket (11).
Push coupling gasket (7 and 11) on pipe (12).
Remove pipe (12) from pipes (13 and 14).
Remove coupling gaskets (7 and 11) from pipe (12)
Disconnect air hose (15) from
pneumatic actuator (16).
Remove four nuts (17),
lockwashers (18), screws (19),
and two flange coupling
halves (20) from two flange
coupling gaskets (21 and 22).
