TM 9-2320-279-20-3
Change 5
19-33
Hydraulic System Maintenance Instructions (Cont)
(7)
Install control valve (19), three
screws (20), lockwashers (21),
nuts (22) on valve bracket (1).
(8)
Install five hose assemblies (23,
24, 25, 26, and 27) on elbow (15),
elbow (16), adapter (17), and
tee (18).
NOTE
When installing control cable, make
sure washers are on each side of
bracket before tightening nuts.
(9)
Install control cable (28) on
cable bracket (4). Tighten two
nuts (29).
(10)
Install clevis (30), pin (31), and
cotter pin (32) on valve lever (8).
c. Follow-on Maintenance.
(1)
Fill hydraulic reservoir
(LO 9-2320-279-12).
(2)
Adjust primary pump hydraulic motor
control cable (para 19-14).
END OF TASK
