TM 9-2320-279-20-2
10-8
Change 5
Axle Maintenance Instructions (Cont)
10-5. AXLE SHAFT REMOVAL/INSTALLATION, NO. 3 AND NO. 4 AXLES (CONT).
NOTE
Model A contains an axle shaft gasket, and
model B does not.
(2)
Remove axle shaft (4) and gasket (5).
Discard gasket.
b. Installation.
NOTE
Use RTV sealant on Model A and Model B
to seal axle shaft.
(1)
Coat inside of axle shaft (1) flange
with RTV sealant.
(2)
Install axle shaft (1).
(2)
Install eight dowels (2),
lockwashers (3), and nuts (4).
(3)
Follow torque sequence and
tighten eight nuts (4) to 40 lb-ft
(54.24 NSm).
(4)
Follow torque sequence and
tighten eight nuts (4) to 145 to
155 lb-ft (197 to 210 NSm).
c. Follow-on Maintenance.
Check axle oil. Fill axle with oil
(LO 9-2320-279-12).
END OF TASK
