TM 9-2320-279-20-2
Axle Maintenance Instructions (Cont)
10-4. STEERING ARM REMOVAL/INSTALLATION, NO. 1 AND NO. 2 AXLES (CONT).
(2)
Install grease fitting (3) in
steering arm (1).
(2.1) Coat outside edge of four
dowels (4) with sealing compound.
(3)
Install four dowels (4) over ball
socket studs (2).
(4)
Install steering arm (1) on ball
socket (5) with four
lockwashers (6) and nuts (7).
(5)
Tighten four nuts (7) to 320 lb-ft
(434 N•m).
(6)
Install end of drag link (8) in
steering arm (1).
(7)
Install nut (9) on drag link (8).
(8)
Tighten nut (9) to 165 lb-ft
(224 N•m).
(9)
Install cotter pin (10).
c.
Follow on Maintenance. None.
END OF TASK
10-6
Change 2
