TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-56. SNATCH BLOCK MOUNTING ASSEMBLY REMOVAL/INSTALLATION (M984).
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
M984
Test Equipment
None
Special Tools
None
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
TM 9-2320-354-10 Snatch block removed.
Supplies
None
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic (2)
Special Environmental Conditions
None
General Safety Instructions
None
a.
Removal.
(1)
Soldier A removes four nuts (1) and
lockwashers (2) while Soldier B holds
four screws (3).
(2)
Remove left side bracket (4) and four
screws (3).
(3)
Soldier A removes four nuts (5) and
lockwashers (6) while Soldier B holds
four screws (7).
(4)
Remove right side bracket (8) and four
screws (7).
b. Installation.
(1)
Install right side bracket (8) with four
screws (7).
(2)
Soldier A installs four lockwashers (6)
and nuts (5) while Soldier B holds four
screws (7).
(3)
Install left side bracket (4) with four
screws (3).
(4)
Soldier A installs four lockwashers (2)
and nuts (1) while Soldier B holds four
screws (3).
c.
Follow-on Maintenance. Install snatch
block (TM 9-2320-354-10).
END OF TASK
16-212
Change 2
