TM 9-2320-279-20-2
Cab and Body Maintenance instructions (Cont)
Compress springs on both left and right front tank mounts to 3-1/2 in. to 3-3/4 in. (89 mm to 95 mm).
(9)
Tighten three locknuts (15) on front tank mounting brackets (10).
(10)
(11)
Tighten four locknuts (20) on rear frame mounting brackets (4).
Tighten eight nuts (7) on eight screws (8) behind rear frame mounting bracket (4).
(12)
Position tank front crossmember (21)
on truck (22).
(13)
Install right side of front
crossmember (21) on truck (22) with
three screws (23) and nuts (24).
Tighten nuts.
(14)
Install left side of front
crossmember (21) on truck (22) with
three screws (25) and nuts (26).
Tighten nuts.
c.
Follow-on Maintenance.
(1)
Install stowage box (as required)
(para 16-34).
(2)
Install fuel tank (as required) (para 4-7).
(3)
Install center mud flaps (as required)
(para 16-20).
(4)
Install ladder (TM 9-2320-279-20).
(5)
Connect tank vent drain (para 16-49.1)
(6)
Connect side clearance lights.
END OF TASK
Change 2
16-209
