TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
NOTE
There are two types of fasteners for
the dipstick storage tube, Model A and
Model B. Model A uses a lockwasher
and hex nut underneath the tank
rollover rail. Model B does not use hex
nuts and uses the lockwasher with the
screw. Do step (3) for Model A and do
step (3.1) for Model B.
(3)
Install dipstick tube (2) on left rollover
rail (5) with two screws (6),
lockwashers (7) and nuts (8).
(3.1) Install dipstick tube (2) on left rollover
rail (5) with two screws (6) and
lockwashers (7).
c.
Follow-on Maintenance. Install dipstick
TM 9-2320-279-10).
END OF TASK
16-52.1 HOSE COVER REMOVAL/INSTALLATION (M978).
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
M978
Test Equipment
None
Special Tools
None
Supplies
None
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Rcferences
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Special Environmental Conditions
None
General Safety lstructions
No smoking, flame, sparks, and hot or glow-
ing objects within 50 ft (15 m) of vehicle.
Change 2
16-205
