TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-52. DIPSTICK TUBE REMOVAL/INSTALLATION (M978) (CONT).
a.
Removal.
NOTE
There are two types of fasteners for
the dipstick storage tube, Model A and
Model B. Model A uses a lockwasher
and hex nut underneath the tank
rollover rail. Model B does not use hex
nuts and uses the lockwasher with the
screw. Do step (1) for Model A and do
step (1.1) for Model B.
(1)
Remove two nuts (1),
lockwashers (2), screws (3), and
dipstick tube (4) from left
rollover rail (5).
(1.1) Remove two screws (3),
lockwashers (2), and dipstick
tube (4) from left rollover
rail (5).
(2)
Remove pin (6) from tube (4).
(3)
Cut plastic cable tie (7) and remove
spring (8) from tube (4).
6. Installation.
(1)
(2)
Install spring (1) in dipstick tube (2)
with plastic cable tie (3).
Install pin (4) in tube (2).
16-204
Change 2
