TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-37.1. VISE, VISE MOUNT AND VISE SUPPORT REMOVAL/INSTALLATION (M984E1)
(CONT).
b. Installation.
(1) Install vise support (1) on frame rail (2)
with three screws (3) and nuts (4).
(2) Install air reservoir tank (5) vise
support (1), and two brackets (6) with
four screws (7) and nuts (8).
(3)
(4)
(5)
(6)
Install roller (9) in vise arm (10).
Install vise arm (10) in vise support
with pin (11) and lockpin ( 12).
Install screw (13).
Aline pin guide (14) and install in
roller (9) and vise arm (10).
Install grease fitting (15) in pin
guide (14).
(7)
(8) Install vise (16) on vise arm (10) with
four screws (17) and locknuts (18).
(9) Loosen screw (13).
(10) Remove lockpin (12) and pin (11).
(11) Push vise arm (10) into stowed position.
(12) Install pin (11) and lockpin (12).
(13) Tighten screw (13).
c. follow-on Maintenance. None.
END OF TASK
1 6 - 1 6 5
