TM 9-2320-279-20-2
16-102
Change 4
Cab and Body Maintenance Instructions (Cont)
16-22.1. MUD FLAPS AND REAR BRACKETS REMOVAL/INSTALLATION
(M984E1) (CONT).
(7)
Remove cotter pin (22) and mounting
bar (20).
NOTE
·
There are two models of mud flap
that may be installed on the vehicle.
·
Model A has a support bracket and
spacer.
·
Model B has a one piece support
bracket.
·
Perform steps (8 and 9) for Model A.
·
Perform step (8.1 and 9) for Model B.
(8)
Remove two locknuts (23), screws (24),
support bracket (25), and spacer (26).
(8.1) Remove two locknuts (23), screws (24),
and support bracket (25.1).
(9)
Remove two screws (27), nuts (28), and
mounting bracket (29).
