TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-22.1. MUD FLAPS AND REAR BRACKETS REMOVAL/INSTALLATION (M984E1) (CONT).
c.
Left Center Mud Flap and Bracket
R e m o v a l .
(1) Remove four locknuts (1), screws (2),
retaining plate (3), and mud flap (4).
(2) Remove four nuts (5), screws (6), and
mounting bracket (7).
d .
Left Center Mud Flap and Bracket
Installation.
(1) Install mounting bracket (7) with four
screws (6) and nuts (5).
(2) Install mud flap (4) and retaining
plate (3) with four screws (2) and
Iocknuts (1).
e. Right Center Mud Flap Removal.
(1) Remove nut (1), lockwasher (2), screw (3), and chain (4) from reservoir clamp (5).
(2) Remove nut (6), two washers (7), screw (8), and chain (4) from mud flap (9).
(3) Remote two S-hooks (10) from chain (4).
(4) Remove four locknuts (11), screws (12), retaining plate (13) and mud flap (9) from bracket (14).
(5) Remove three nuts (15), screws (16), and bracket (14).
f .
Right Center Mud flop Installation.
(1) Install bracket (14) with three screws (16) and nuts (15).
(2) Install retaiing plate (13) and mud flap (9) with four screws (12) and locknuts (11).
(3) Install two S-hooks (10) on chain (4).
(4) Install chain (4) on mud flap (9) with screw (8), two washers (7) and nut (6).
(5) Install chain (4) on reservoir clamp (5) with screw (3), lockwasher (2) and nut (1).
16-100
