TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
(3)
(4)
(5)
(6)
(6.1)
(6.2)
(6.3)
(6.4)
(7)
(8)
(9)
Attach bracket (8) to fender (2) with two
screws (9), lockwashers (10), and
nuts (11).
Attach bracket (12) with screw (13),
lockwasher (14), and nut (15).
Attach holddown (16) with screw (17)
and nut (18).
NOTE
The M1977-CBT uses a spacer and shorter front fender mount.
Do steps (6.1) through (6.4) for M1977-CBT only.
Do steps (7) through (9) for all models except M1977-CBT.
Do steps (7) and (8) for all models except M984E1 and M1977-CBT.
Do step (9) for M984E1 only.
Attach rear fender bracket (19) with three
screws (20).
Install bracket (20.1) with two
screws (20.2) and nuts (20.3).
Install brackets with seven screws (24).
Soldier A installs three brackets (19) and
bracket (19.1) with eight screws (19.2)
and nuts (19.3), while Soldier B supports
fender (2).
Soldier A tightens nuts (19.3 and 20.3)
while Soldier B holds screws (19.2
and 20.2).
Soldier A and Soldier B install fender (2)
on vehicle and attach fender bracket (19)
to vehicle chassis (21) with two
screws (22) and nuts (23).
Soldier A and Soldier B install fender (2) on vehicle.
Install three screws (24) through fender (2) to bracket (19).
Change 2
16-50.1
