TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
NOTE
Do step (7) for all models except M984E1.
(7)
Remove three screws (17) from
fender (5) and fender bracket (3).
NOTE
Only three screws and nuts will be present
if air inflator was removed.
(8)
Remove four nuts (18), screws (19), and
two fender braces (20).
NOTE
Do step (9) for M984E1 only.
(9)
Remove two nuts (21), screws (22), and
braces (23).
b. Installation.
NOTE
Do step (1) for M984E1 only.
(1)
Install two braces (1) to fender (2) with
two screws (3) and nuts (4).
NOTE
Do not install bottom, right-hand (inside,
lower) screw and nut if inflator is to be
installed.
(2)
Install two fender braces (5) to
fender (2) with four screws (6) and
nuts (7).
16-50
Change 2
