TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-10. FRONT AND REAR ENGINE COVER FRAME REMOVAL/INSTALLATION (CONT).
(3) Install left side frame (7) with three
screws (8) and locknuts (9).
(4) Install rubber strip (10) to left side frame (7)
and support (11) with eight rivets (12).
c. Rear Engine Cover Frame
Removal.
(1) Remove two nuts (1), four
lockwashers (2),
washers (3), and two
screws (4) from each side of
frame (5).
(2) Remove frame (5) from
mounts (6).
(3) Remove 16 rivets (7) and
two rubber strips (8).
d. Rear Engine Cover Frame
Installation.
(1) Install two rubber strips (8)
to frame (5) with
16 rivets (7).
(2) Place frame (5) on
mounts (6).
(3) Install two screws (4), four
lockwashers (2), washers (3), and two nuts (1) on each side of frame (5).
e. Follow-on Maintenance.
(1) Install engine side panels (TM 9-2320-279-10).
(2) Install engine cover (para 16-9).
(3) Stow spare tire (only if front engine cover frame was removed) (TM 9-2320-279-10).
END OF TASK
16-40
