TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-8. CAB ROOF COVER PLATE REMOVAL/INSTALLATION (CONT).
b. Installation.
WARNING
Adhesives, solvents, and
sealing compounds can burn
easily, can give off harmful
vapors, and are harmful to
skin and clothing. To avoid
injury or death, keep away
from open fire and use in
well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing, wash immediately
with soap and water.
(1) Apply silicone
adhesive-sealant around rim
of cab opening (1).
(2) Position cover plate (2).
Install 34 screws (3) in
cover plate and top of
cab (4).
c. Follow-on Maintenance. None.
END OF TASK
16-9. ENGINE COVER REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Shut off engine.
None
TM 9-2320-279-10 Engine side panels removed.
Supplies
Special Environmental Conditions
None
None
Personnel Required
General Safety Instructions
MOS 63S, Heavy wheel vehicle mechanic
None
16-36
