TM 9-2320-279-20-2
16-12
Change 4
Cab and Body Maintenance Instructions (Cont)
16-2. DOOR REMOVAL/REPAIR/INSTALLATION (CONT).
c. Assembly.
NOTE
Assembly procedure is the same for both
doors. Left door is shown.
(1) Install female dovetail (1) in door (2)
with four screws (3).
(2) Coat locking channel (4) and locking strip (5) with soapy water.
(3) Slip locking channel (4) on door (2) with locking slot facing outside.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(3.1) Clean ends of locking channel (4) with primer.
(3.2) Apply adhesive to ends of locking channel (4).
