TM 9-2320-279-20-2
Change 4
16-9
Cab and Body Maintenance Instructions (Cont)
(15)
Remove six screws (21) from regulator (22). Remove regulator.
(16)
Remove cotter pin (23) and pin (24) from outer rod link (25).
(17)
Remove outer rod link (25) from door latch (26) and set outer rod link aside.
NOTE
Some vehicles have two nuts.
(18)
Remove three nuts (27) and channel (28).
NOTE
Some vehicles may have felt channel.
(18.1) Remove rubber seal (28.1) from channel (28).
(18.2) Remove rubber seal (28.1) from door channel (28.2).
(19)
Pull glass (29) from bottom and remove glass from door channel (30).
(19.1) Remove rubber pad (30.1) from window stop (30.2).
(20)
Remove locking strip (31).
(21)
Fold inside edge of locking channel (32) out around entire peep window glass (33).
(22)
Remove peep window glass (33).
(23)
Remove locking channel (32).