TM 9-2320-279-20-2
Frame and Tire Carrier Maintenance Instructions (Cont)
(8)
(9)
(10)
If tire
Remove four screws (22),
nuts (23), and lockwashers (24)
from tire carrier (18) and
fender (25).
Remove two screws (26),
nuts (27), and lockwashers (28).
Remove tire carrier (18) from
fender (25).
NOTE
carrier has bolt-on type top bar,
do step (11).
(11)
Remove two screws (29),
nuts (30), 24 washers (31), and
bar (32).
b. Installation.
NOTE
If tire carrier has bolt on type
top bar, do step (1).
Alternately stack washers in
pairs.
Only M1977-CBT tire carrier
has additional bolt holes on
each end.
(1)
Install bar (1) with two
screws (1.11, 24 washers (1.21,
and two nuts (1.31. Tighten
nuts to 35 lb-ft (47 Nm).
(1.1) Place tire carrier (1) on
fender (2).
(2)
Install two screws (3),
lockwashers (4), and nuts (5).
(3)
Install four screws (6),
lockwashers (7), and nuts (8) on
tire carrier (1) and fender (2).
Change 2
14-35