TM 9-2320-279-20-2
Steering System Maintenance Instructions
b. Installation.
(1)
(1.1)
(2)
(3)
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. lb avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Some steering wheel assemblies have a small washer glued to bottom of steering wheel
centered on hole for item 8. If small washer is not attached, do step (1), otherwise go to
step (1.1).
Apply adhesive to washer (1) and install
on steering wheel (2) centered on hole
for screw (8).
Install contact plate (1.1) on steering
wheel (2) with two screws (3).
Install steering wheel (2) on steering
shaft (4) with nut (5). Tighten nut.
Install base plate (6) on steering
wheel (2) using two screws (7).
NOTE
Some steering wheel assemblies have a
lockwasher under the long screw. Do step
(4.1) for this model.
(4)
Install long screw (8).
(4.1) Install long screw (8) with
lockwasher (8.1).
Change 2
13-2.1/(13-2.2 blank)
