TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
(10)
Remove pressure switch (17),
reducer bushing (18),
adapter (19), tee (20), and reducer
bushing (21).
(11)
Remove two elbows (23) from
valve (10).
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Soldier A is inside cab. Soldier B is under
cab.
(1)
Coat threads of two elbows (1) with
pipe thread sealing compound and
install elbows in valve (2).
(2)
Coat threads of reducer bushing (3)
and tee (5) with pipe thread sealing
compound and install in valve (2).
(3) Deleted.
(4)
Coat threads of reducer bushing (6), pressure switch (7), and adapter (8) with pipe thread
sealing compound and install in tee (5).
Change 2
11-143