TM 9-2320-279-20-2
(3)
(4)
(5)
Brake and Air System Maintenance Instructions
Mark position of elbows (11, 12, and 13)
and remove from spring brake control
valve (6). Remove fitting (14).
Remove tee (15), coupling (16) and
nipple (17) from spring brake control
valve (6).
Remove plug (18).
b . I n s t a l l a t i o n .
Adhesives, solvents, and sealing
compounds can bum easily, can give off
harmful vapors, and are harmful to skin
and clothing. ‘lb avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1) Coat threads with pipe thread sealing
compound and install plug (1) in spring
brake control valve (2). Install nipple (3).
(2) Coat threads with pipe thread sealing
compound and install coupling (4) on
nipple (3). Install tee (5) on coupling.
(3) Coat threads with pipe thread sealing
compound and install fitting (6) in
elbow (7).
(Cont)
(4) Coat threads with pipe thread sealing compound and install elbows (7, 8, and 9) in spring brake
control valve (2).
11-68
