TM 9-2320-279-10-1
Change 6
3-54.5
Operators Maintenance (Cont)
(5) Install hoist arm (1) in mount (3).
(6) Remove and keep safety pin (4) and pin (5) from hoist arm (1).
(7) Remove nut (6), washer (7), and extension (8) from mount (3).
(8) Install extension (8) on hoist arm (1).
(9) Line up holes in extension (8) and hoist arm (1).
(10) Install pin (5) and safety pin (4).
(11) Turn handcrank (9) counterclockwise and route cable (10) over end of
pulley (11).
