Change 8
TM 9-2320-279-10-1
2-144.1
M977 Through M985 General Operating Procedures (Cont)
b. Install Footrest.
(1)
Remove safety pin (1) and yoke pin (2).
(2)
Pull out footrest (3).
(3)
Slide footrest (3) toward seat brace (4) so holes (5) are alined.
(4)
Install yoke pin (2) and safety pin (1).
c. Stow Footrest.
(1)
Remove safety pin (1) and yoke pin (2).
(2)
Slide footrest (3) under seat brace (4).
(3)
Install yoke pin (2) and safety pin (1).
d. Adjust Seat (Non- FHTV Model Vehicles Only).
WARNING
Care should be taken when
adjusting the knob. The seat
collapses when the knob screw is
adjusted, and can cause injury if
hand is between seat mount and
the low neck.
NOTE
Sit in seat to make the following
adjustments.
(1)
Turn knob (1) to control
cushion firmness.
NOTE
Retaining straps may need to be
loosened before moving seat
forward.
